• Belt Dryer for Wood Chips and Dusts (DW2-20*3)
  • Belt Dryer for Wood Chips and Dusts (DW2-20*3)
  • Belt Dryer for Wood Chips and Dusts (DW2-20*3)
  • Belt Dryer for Wood Chips and Dusts (DW2-20*3)

Belt Dryer for Wood Chips and Dusts (DW2-20*3)

Movement Way: Chain Driving
Heating Mode: Transmission
Drying Medium: Effluent Gases
Operation Pressure: Atmospheric Dryer
Control System: PLC Optional
Structure: Air Flow Drier
Customization:

Contact Supplier

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory, Group Corporation

Basic Info.

Model NO.
DW2-20*3
Operational Method
Continuous
Type of Flow
Parallel Flow
Type of Atomization
Gas Atomization
Sprayer
Air-Flowing Type
Appearance of Dried Sample
Wood Chips, Wood Dust
Transport Package
Exported Standard/According to Requirement; FCL
Specification
SGS, CE, ASME
Origin
China
HS Code
84512900
Production Capacity
500PCS/Year

Product Description

1. Requirements

 
No. Items Data
1 Raw material Wood chips and dusts
2 Moisture content before drying 50%
3 Moisture content after drying 25%, the thickness of wood chips must be less than 5mm, or the materials cannot be dried to 25% of moisture within 1 hour. For wood blocks or chips thicker than 5mm, drying time would be increased significantly.
4 Heating method Flue gas from boiler, 220 degrees C, 34000m3/h (at 220 degrees)
5 Capacity (before drying) 3000kg
6 Capacity (after drying) 2000kg
7 Moisture dried 1000kg
 

2. Design data

 
No. Items Data
1 Model of dryer DW2-20*3 three-layer belt dryer, width 2m, valid length 20*3=60m.
2 Drive system
  • Belt (wire netting) area for material drying: 60*2=120m2.
  • Chain driving system. Chain shafts are located out of the heating box.
  • Reducer is equipped on the end of discharge, and chain wheels are connected with chains. Stainless steel netting (s.s.304) is installed on the rods.
  • Drive system power: 2.2Kw*3=6.6Kw
3 Heating method Hot flue gas is distributed to separate drying units through gas pipes.
4 Circulating fan Model: 4-72-8C-7.5Kw, 8 units, flow 18000m3/h, pressure 800Pa
5 Moisture exhaust fan Model: 4-72-6A-4Kw, 2 unit, flow 12000m3/h, pressure 1000Pa
6 Installed capacity 74.6Kw

  

three-layer belt dryer for wood chips and dusts
 
Belt Dryer for Wood Chips and Dusts (DW2-20*3) Belt Dryer for Wood Chips and Dusts (DW2-20*3) Belt Dryer for Wood Chips and Dusts (DW2-20*3)
 
 
 

Send your message to this supplier

*From:
*To:
avatar Mr. Alan
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2012

Suppliers with verified business licenses

Manufacturer/Factory, Group Corporation
Plant Area
101~500 square meters
Management System Certification
ISO 9001, ISO 14001, HACCP